Locoloc® #3-H Handswager

Swage: Hydraulic compression tool with a two-stage section for use with interchangeable die sets, 1/4″ to 1/2″. 

Length: 23” 

Width: 6”  

Weight: 13 lbs. 

Exerts 14 tons of pressure. A few strokes of handle brings the dies from wide open to contact with the fitting to be swaged. Then an internal valve automatically shifts from the low-pressure pump stage to the high-pressure compression stage. A relief valve prevents over-compression. 

The advanced-retract control for the ram is located in the movable handle. It is operated by twisting the handle less than a 1/4 turn. 

Full visibility of the working area is afforded by the narrow, 180° swivel “C” head, making it easy to position the dies on the fitting. Gauge supplied with each die. 

MADE IN THE USA: YES 

Our Locoloc® Hand Swaging tools are domestically manufactured at our Naples, Florida facility. By purchasing hand swaging tools from Loos & Co., Inc., you are guaranteed a well-crafted American made product, while directly supporting American jobs and the American manufacturing industry. 

Accessories 

• Complete with plastic carrying case 

• Dies sold separately with gauges included 

• Head rotates 180° for difficult situations 

Maintenance 

Your LOCOLOC® Swager has been designed to give you years of trouble-free service. To obtain the best performance, we recommend: 

1. Keep the tool clean and free from dirt or metal particles, especially around the head, dies, and ram of the tool. 
2. Lubricate all moving parts regularly. 
3. Keep all bolts tight. 
4. Check the oil level periodically and use clean oil as recommended. Never mix different brands or types of oil.