How to Set Up an M1 Roll Swaging Machine Video Transcript
Welcome back to Loos Tube
Today you’ll learn how to assemble our LOCOLOC M1 Swaging Machine
Your M1 swaging machine comes neatly packaged in a metal tool box
Along with an operator’s manual and two allen wrenches for adjustment
Refer often to your operator’s manual
The manual contains instructions and images that will assist you through every step of setup and use
You will also find guidance for troubleshooting the machine, instructions for maintenance, and other helpful tips
Begin by removing your machine from the toolbox and lay it lengthwise on your workspace
Now prepare your set of dies
First identify whether you are swaging straight shank fittings or ball ends and select the proper die type
The die sets for straight shank fittings are circular with a groove along the edge that will hold the fitting
Dies for ball type ends are square shaped with grooves in each corner
The corners are labeled one through four to assist in the swaging process
Now choose the proper size dies with a cable diameter you will be swaging
Each box of dies contains an upper and lower die which are clearly marked
Place the upper and lower dies onto the machine
There is a key match to ensure that the dies will be properly installed
Now secure the dies with the included flat washer and cap screws
But do not overtighten
Simply turn by hand until the fit is snug
This will allow for the dies to move slightly if necessary and align properly with the fitting
Refer to your manual to select the correct feed guide and adapter for the terminal you will be swaging
If you are swaging ball ends, remove this adapter all together
Place the feed guide onto the machine and use the included allen wrench to secure it
Be sure not to fully tighten one side before the other
Alternate between them to ensure proper alignment
Your LOCOLOC M1 swaging machine is now ready to use
Click one of the clips below for the next step in the swaging process
And don’t forget to subscribe to our channel for updated content
